Exhibitor products

EUCHNER combines its proven and robust safety switches and safety gate systems with the advantages of safe, standardised communication via IO-Link Safety. Thanks to comprehensive data availability, the products enable easy installation, maintenance and smooth device replacement. You benefit from: - Secure identification and transmission of the actuator ID and key data (SIL3 / PL e) - Uniform interface for switches, interlocks and safety gate systems - Reduced planning and installation effort - Fewer switch variants thanks to flexible conversion of the coding level via the IO-Link setup - Easy device replacement - Detailed status and fault diagnosis in real time

When something needs to be lifted, a crane, ropes or chains are needed – plus anchoring points on the load itself. Ganter offers a wide range of solutions here. The classic and simplest lifting points are lifting eye bolts according to DIN 580, which are screwed into existing threads on the load. When threads are not possible, lifting eye nuts according to DIN 582 are used instead. Ganter offers these standard parts in two materials: steel and stainless steel. However, a look in the Ganter portfolio reveals far better and stronger lifting points that are optimized for specific materials and – most important – easier to handle. In particular, the integrated RFID tags are worth mentioning as a special highlight. These make it possible to clearly identify specific lifting points during wear and safety inspections and manage them digitally and without system interruption. Such RFID tags can be found in the lifting eye bolt GN 581 and the lifting eye nut GN 583, for example, which are still able to rotate around their vertical axis even after installation. Both of these options also identify load rings GN 586.1, although here the lifting eye can also be folded down. And thanks to the eye ring with ball bearing, load rings GN 5860 are fully rotatable even under load. Load rings GN 587.1 are not screwed in but welded on. This load ring is also suitable for outdoor applications since the design of the weld-on block permits a closed seam that is safe from corrosion. The ring itself can be swiveled by 180 degrees, and an optionally integrated spring can secure it in any position. The lifting point GN 589 for welding can accept loads from any direction and impresses with its minimal height. This is an extremely important feature when the maximum hook height of the lifting equipment is limited.

SES-STERLING presents its new product: the self-closing textile split braided sleeving PLIOSIL WS. It is distinguished by a new opening system, easier assembly of the electrical harnesses and improved support. Split sleeving with overlap: PLIOSIL WS Its characteristics • material: polyester • colour: black • diameters: from 5 to 50 mm • operating temperatures: -50 to +150 °C • fire resistance: V0 UL94, halogen-free Fields of application • automotive industry • railway industry • electronics industry Special features of the PLIOSIL WS sleeving The product has the particularity of opening while allowing a clean closing thanks to its self-closing system. This new feature makes it possible to improve efficiency. Due to its opening, the sheath allows the assembly and maintenance of electrical harnesses and also branches, while adapting to their irregular shapes without stiffening them. It is possible to assemble electrical harnesses before or after connection.

Ganter’s indexing plunger selection is extremely diverse. And yet the standard parts experts from the Black Forest continue to find new functional niches to fill: indexing plungers with chamfered pins. They are nearly universal elements that can be found anywhere that latching, locking and securing is required: indexing plungers. Despite the diverse range of types and dimensions, they previously all had one thing in common: The latching process typically makes use of a cylindrical hole that is aligned with the plunger pin, allowing the pin to engage without difficulty. For example, when a carriage travels past a latching hole. But there are also cases in which only an edge or a groove must suffice for latching, and it may not even be precisely positioned relative to the plunger pin. For such situations, Ganter has now developed a new type of indexing plunger that can independently latch into edges and grooves. This is made possible by a chamfered plunger pin. When the chamfered pin encounters a raised latching geometry, it retracts and then springs back out again once it reaches the latching point. More information on Ganter standard parts can be found on the internet at ganternorm.com

The GTM400 was specifically designed for demanding high-voltage applications and combines proven sealing technologies from the aerospace industry and high-performance industrial applications. Thanks to innovative Glass-to-Metal Seal (GTMS) technology, the contactor is highly reliable and durable even under extreme conditions. Key features at a glance: 𝗟𝗲𝗶𝘀𝘁𝘂𝗻𝗴 ▫️ Up to 1500 Vdc / 400 A ▫️ Fully bidirectional switching ▫️ Outstanding breaking capacity for maximum operational reliability 𝗦𝗶𝗰𝗵𝗲𝗿𝗵𝗲𝗶𝘁 ▫️ Hermetically sealed ▫️ High short-circuit resistance 𝗘𝗳𝗳𝗶𝘇𝗶𝗲𝗻𝘇 & 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻 ▫️ Highly efficient DC dual coils for low energy consumption ▫️ Flexible mounting (vertical or lateral) ▫️ Optional AUX switch (NO / NC) ▫️ Custom cable and harness solutions available

Various types of sensors used for a wide range of applications, such as presence/absence or differentiation of parts. Photoelectric sensors: Presence detection of test objects by means of LED light source. Photoelectric sensors are used for presence detection or part discrimination. Distance- or intensity-based detection makes it possible to distinguish between weakly reflective objects as well as highly reflective objects (e.g. metals). Fibre optic sensors: Fast and reliable detection using fibre optics for a wide range of applications. The fibre optic sensors are particularly user-friendly and easy to operate. The large selection of fibre optics means that the right sensor can be found for every application and environmental condition. Laser Sensors: Large Detection Distance for Presence Detection Using Visible Focused Laser Light Beam. KEYENCE has a variety of laser sensors that can detect components based on intensity or distance. Depending on the model, the sensors are available as all-in-one or with a separate evaluation unit. Inductive sensors: Presence detection of ferrous and non-ferrous metal objects. The fast, high-precision detection enables 24-hour monitoring of plants and products and prevents the production of rejects from the outset. Network communication units: Monitor and control sensors via Profinet, EtherNet/IP™, EtherCAT and other protocols. By using KEYENCE network communication units, you simplify the integration of sensor data into the machine control system and can reduce the wiring effort. By comparing multiple processes in parallel, it is possible to detect potential problems before they occur.

Immer mehr Technologien nutzen die Intelligenz von Sensoren. Die maschinellen Sinnesorgane sorgen nicht nur dafür, dass unser Alltag smart wird, sondern heben auch industrielle Prozesse auf ein neues Effizienzlevel. Jedoch stößt auch der leistungsfähigste Sensor an Grenzen, wenn er äußeren Störungsfaktoren schutzlos ausgesetzt ist. Durchdachte Gehäuse erhalten die Funktionalität der Sensoren und stellen so sicher, dass sich die Investition in IIoT-Technologie für Unternehmen auf dem Weg in die Industrie 4.0 nicht nur kurzfristig, sondern auch langfristig lohnt.

We offer more than 2500 sensors, including: • Ultra miniature photoelectric sensors as small as 14 x 8 x 3mm • Trigonometric sensors, which can detect objects independent of color and surface • Fiber sensors, with a huge range of 150 different fibers • Analog laser sensors with an accuracy as low as 0.01µm • Safety sensors and safety light curtains • Inductive, flow, and press sensors round off our sensor portfolio.

Sensors for the reliable acquisition of physical quantities. From proximity switches and light barriers to temperature and pressure sensors. Seamless integration into your housing solution – mechanically and electrically matched. Robust industrial design for harsh environments. All common interfaces: analog 0-10V / 4-20mA, digital IO-Link, or fieldbus systems. Mounting brackets and cable routing are included in the planning. Whether OEM components or customized sensor solutions – we find the right technology for your application. Consulting, integration, and commissioning from a single source.

Absolute encoder with stainless steel housing from TR Electronic withstand aggressive environments. From now on, the proven series of absolute encoders from TR Electronic is also available in a stainless steel housing! Because special environments require special materials: The C__582 encoders retain their tried and tested geometry and thus also fit into the usual installation spaces as a resistant stainless steel variant. The encoder made of stainless steel 1.4404, AISI 316L is designed for use in aggressive environments: The surface is smooth, as status information and reset function are integrated into the software and the nameplate data is permanently lasered into the stainless steel surface. The uniform connector connection pattern on the side away from the shaft and a simplified flange/shaft geometry also minimize the contact surface for liquids and dusts. The encoder is available with a degree of protection up to IP 67, which also allows the encoder to be washed down. TR offers optical sensing up to 18 bit resolution within revolution with true multi-turn gearing that reliably senses revolutions in any operating condition. The actual values are transmitted via Industrial Ethernet (PROFINET, EtherCAT, Ethernet/IP). These interfaces offer extensive transmission options: Position and speed or rotational speed are available in real time; there is also extended status data for additional evaluations. With the standardized connectors, the user has access to a wide range of pre-assembled cables. Different sheath materials are suitable for different classes of materials. Thus, TR Electronic also has special solutions for special environments.

Our inspection solutions for EV batteries ensure the highest quality standards through precise testing along the entire production chain.

Our robotic vision solutions combine intelligent image processing with robotics, enabling flexible, automated inspection and handling processes.

Our Vision AI platform Neuralyze® covers the entire workflow from data management to productive operation.

sepioo labels were developed specifically for the sepioo IIoT platform and enable near real-time data transmission. At the same time, they offer extremely low power consumption, excellent readability, and a built-in accelerometer and temperature sensor. The smart sepioo industrial labels are available in sizes 2.6“, 4.2”, 7.4“, 9.7”, and 12.2". The series is complemented by the sepioo D2.6 B and D2.7 B labels with buttons for two-way user interaction and the sepioo NFC label. ADVANTAGES • Near real-time data transmission • Very low power consumption • Built-in accelerometer and temperature sensor • Excellent readability • Designed for optimal compatibility with the sepioo IIoT platform

Low Emission 13 W to 120 W - 19" Racks and modules The sum of all advantages of linearly regulated and switching power supplies. Particularly well suited for EMC sensitive systems in sensor technology, measurement technology or image processing. Systems in which leakage currents can cause problems. Applications where a very good decoupling between primary and secondary side or secondary side and ground is required.