Exhibitor products

Switch cabinet lights: Depending on the area of application and use of the control cabinet, we offer lights in different lengths, materials and equipment variants. We have the right solution not only for standard cabinets, but also for areas of application with moisture and high hygiene requirements, as well as for data network cabinets with 19-inch racks. We manufacture lights with different voltages and approvals for worldwide use. viewing window: Viewing windows, also known as inspection windows, offer better visibility and protection of the electrical components in your control cabinet. They are made of acrylic glass (SRA) or aluminum (SRC) and offer protection against the ingress of foreign bodies. Our SRA windows are available in different sizes. The SRC windows are manufactured according to customer specifications between 200x250 mm and 1000x1200 mm. Air conditioning: We offer you all the components you need for optimal air conditioning in a control cabinet. From fans and heaters to the right thermostats. With our products you ensure a safe environment in your systems. Accesories: Other products such as connection cables, sockets, circuit diagram pockets, plugs, door position switches and much more. can also be obtained from us.

The test laboratory at the Hunzenschwil location in Switzerland is the main point of contact for product qualifications and testing for the entire KAISER GROUP, and carries out evaluation, testing and certification of a wide range of products from across the group. The test laboratory fulfils the relevant requirements of IECEE OD-2048 and OD ECS 035 / OD ECS 037 relating to the acceptance of test reports in the CTF/MTL procedure. Our laboratory complies with the applicable requirements of ISO/IEC 17025:2017 (General Requirements for the Competence of Testing and Calibration Laboratories). We offer - Testing in accordance with general test standards or individual client specifications - Planning, organisation and carrying out of the tests - Performance testing of your specific cable in combination with our cable gland

The CFW500 features state-of-the-art plug-and-play options designed for fast commissioning, maximum flexibility and competitive advantage while delivering outstanding performance and reliability. The system is designed for industrial or commercial applications and is perfect for OEMs, system integrators, switchboard equipment manufacturers and end users.

The CFW900 is a high-tech VSD to drive and control three-phase induction and permanent magnet motors. With excellent static and dynamic performance, high precision in torque, speed and position control, it can solve a wide range of applications due to its high overload capacity. Thanks to its technology, the CFW900 inverter ensures energy savings, safety, increased productivity and quality in the process network in which it is implemented. It allows quick and easy access to the application information and configuration settings. Through a menu structure, the new user interface of the CFW900 line offers an unprecedented interactive user experience, allowing settings and configurations with detailed parameter description directly on the HMI, as well as event logs with date and time. Another advantage of this solution is that this product is designed to be the best VSD on the market, bringing more comfort and flexibility to the operation, maintenance and management of your inverter, with Bluetooth communication® and the free WPS Mobile App. The CFW900 allows you to set parameters, monitor, create backups and even retrieve your VSD data. This product can also be connected to the main industrial communication networks without additional modules. It has two switch Ethernet ports and a serial port (RS485). In addition, thanks to a wide range of plug-in modules, it can be used for different applications. Discover all the possibilities and opportunities offered by the CFW900 and connect the present of your company with the future of the industry.

• Analogue circuit simulation with LT-Spice • Layout production with Eagle • FPGA design of the XILINX Spartan platform • Documentation and reporting per the DIN EN ISO 9001 standard • Hardware and software tests on test setups

Assembly with circular connectors according to customer requirements

Professional floor cleaning in industrial, logistics, healthcare, and educational facilities is labor-intensive, costly, and heavily dependent on individual attention to detail for quality. Manual cleaning is tiring, cannot be performed around the clock, and often yields inconsistent results. The PUDU CC1 from S&K Solutions addresses this challenge with fully autonomous cleaning. Using proven 4-in-1 technology—sweeping, scrubbing, vacuuming, and mopping—the robot cleans large floor areas independently, precisely, and without fatigue. With a suction power of 17,000 Pa and an intelligent navigation system, it navigates rooms on its own, avoids obstacles, and recharges automatically. The water tank and waste water tank are also filled and emptied automatically. The PUDU CC1 Pro expands these capabilities with AI-powered real-time quality monitoring—ideal for areas with the highest hygiene requirements, such as hospitals, production facilities, or high-traffic public areas. The result: consistently high cleaning quality, significantly reduced labor costs, and an economically attractive ROI—all with maximum operational reliability. S&K Solutions advises you on the right model and supports you from implementation through to ongoing operation.

Cleaning large industrial areas, warehouses, or logistics centers is hardly economical when done manually: it is time-consuming, labor-intensive, and often yields inconsistent results—especially when dealing with fine dust, production residues, or mixed types of debris. The PUDU MT1 from S&K Solutions solves this problem as a fully automatic, AI-powered sweeper for large areas. With a cleaning width of 70 cm and a cleaning capacity of up to 6,000 m² per hour, it efficiently and thoroughly cleans even extensive areas. AI-powered debris detection identifies different types of dirt and debris in real time and continuously optimizes cleaning performance. The MT1 is suitable for fine dust, production waste, paper, and plastic, as well as spilled liquids—on both dry and wet floors. With up to 8 hours of battery life and a charging time of less than 3 hours, it is designed for 24/7 operation. When the battery is low, it autonomously returns to the charging station and automatically resumes service afterward. Applications: Warehouses and logistics centers, production facilities, airports, subway stations, and home improvement stores. The result: clean surfaces without the need for staff, lower operating costs, and more capacity for value-added activities. S&K Solutions supports you from consultation through to ongoing operation.

Stäubli Cleanroom robots meet ISO 14644-1 class 2 (SCR version) and class 4 (CR version) standards and feature a totally enclosed arm with a glossy polyurethane surface, capable of high dexterity. Compared to other wafer robots, the Stäubli SCR and CR robots offer greater flexibility, higher payload capacity, and extended reach, perfectly meeting the challenges of wafer/photomask/carrier/cassette handling. A compact arm footprint also helps to save precious space in dedicated machines.

Ball catches and magnetic catches for simple but effective closure. So often it is the small elements that make the critical difference for design and usability. Without a doubt this includes ball catches and magnetic catches that – although unseen – can significantly optimize a machine, fixture or installation in qualitative terms. This is particularly the case when flaps, covers or doors need to offer quick access but still remain securely closed. Ball catches of the series GN 4490 offer a very elegant and space-saving way to meet these requirements. The mounting block attached to the moving element engages in the ball catch precisely between the two spring-loaded balls for a positive and non-positive connection. Depending on the size and version, retaining force is between 25 and 150 Newtons. Both parts can be variably positioned, oriented either horizontally or vertically and with engagement from the front or the side. The ball catches are available in a variety of types and with various fastening options using threads or countersunk holes. If the installation situation does not permit the desired positioning, such as for mounting on aluminum profiles, this problem can be easily solved with mounting plates for ball housings GN 4490.1 or with mounting plates for mounting blocks GN 4490.2. More information on Ganter standard parts can be found on the internet at ganternorm.com

The CO2 integrated laser marker is perfectly suited for marking organic materials. Unlike conventional marking systems like inkjet or label, the integrated laser operates without contact and has low maintenance. PERMANENT DIRECT MARKING Our powerful and versatile CO2 laser engravers use a 10600nm wavelength in the infrared range, which provides a direct, identification, and permanent marking on a wide range of materials such as natural materials (wood, leather, paper, fruits & vegetables), transparent material (glass, transparent plastics) and coated materials (painted surfaces, anodized aluminum). ECO-FRIENDLY SOLUTION Direct identification marking with CO2 laser engraver is a real alternative to stamping, inkjet, or labeling in several fields. Our fast laser engraver is environmentally friendly as no ink is used and no waste is generated. The CO2 laser engraver works without materials, unlike the other alternatives, so there is no need to replace ink or stop the machine for maintenance. VISION MANAGER - ONE SOLUTION FOR MARKING & READING With the efficient Vision Manager, identification of your parts is ensured. High-efficiency reading camera, easy to install, grade analysis and sending status information to the PLC are some of the features the module offers. Associated with an extremely high coding speed (up to 10,000 mm/s), the CO2 series is designed to be integrated into high productivity lines.

in different sizes and requirements