Exhibitor products

Paper labels in warehouses cause inefficiencies on a daily basis: Every inventory change requires manual printing and physical replacement—an error-prone, time-consuming, and resource-intensive process. Our electronic labels fundamentally solve this problem. Using modern e-paper technology, storage locations, load carriers, and kanban cards can be updated centrally and in real time—without a single printout. Product data, status data, order information, as well as barcodes and QR codes are transmitted wirelessly to the displays and are clearly legible from every angle thanks to high-contrast E-Ink display technology. The result: your employees save valuable time, errors caused by outdated labels are avoided, and paper consumption drops significantly. Quantity and status changes can be controlled directly from the inventory management system and immediately reflected on the shelf. In addition, integrated LED indicators enable precise localization of individual storage locations—ideal for fast order picking. The labels can be flexibly expanded to include location technologies and seamlessly integrated into existing software systems. S&K Solutions delivers the right complete solution—from consulting and implementation to ongoing support.

The new generation of products is a logical development of the successful EKS system and has many advantages in terms of digital access control and the selection of a safe operating mode. Benefits for you: - Simple implementation thanks to project templates with predefined functions and data fields - Simple assignment of access rights via input screens - Simple authorization blocking via an expiration date - Simple implementation of security standards for data handling and the assignment of rights - Simple integration in any PROFINET environment and systems from any manufacturer

NoVoTronic is available in five profile sizes, with differing lengths: from 106 x 49 x 120 mm to 233 x 121 x 350 mm. The enclosure can be screwed at the front with two cast aluminium lids – optionally with a PUR foam seal or, for highly sensitive electronics, with special EMC seals. To assure reliable protection of the electronics, the screw channels are located not in the interior, but instead on the exterior, thus preventing swarf and other pieces of metal from damaging the highly sensitive electronics while screwing operations are performed. A further highlight is the system groove at the side, which functions both as a styling element and also, in particular, as a functional groove: Either coloured slide-in strips or, in particular, electromechanical components, such as switches and buttons, can be integrated optionally here; in addition, simple adaptation to other enclosures or machine components is also possible in the system groove. One side of the profile features a recess for membrane keypads, while the other side provides ideal installation conditions for displays. Stacking aids and foot elements assure stable connection of multiple enclosures with one another. NoVoTronic thus assures reliable protection, as a handheld, tabletop or attachment enclosure, for all electronic extensions.

- 6 lengths from 190 to 1040 mm - Robust aluminum housing - Tempered float glass front panel - Homogeneous, flicker-free light - M12 connector

• Solid shaft or through hollow shaft • SSI, BiSS C Certified • High flexibility in connection

In addition to proven reliability, this series includes fixed-voltage devices (with an extended setting range of e.g. 18 to 30 Vdc) and analogue programmable devices as built-in units (up to 1500 W) or as full plug-in units in a 19’ system (3000 W). This series is characterised by the following features: - Precise output voltage due to possible sense lead operation - Parallel switchable with symmetrical load sharing (loadshare) - Integrated power failure signalling (PFS) and overtemperature signalling - Optional functional safety in accordance with EN/IEC 62061 SIL 2 and EN - ISO 13849-1 , Performance level PL-d ‘Machinery Directive’ The analogue programming of voltage and current is carried out via an external control voltage of 0 to 5 V or via external resistors. In addition, you can read out the current output voltage and current with a 0 to 5 V voltage via a monitor voltage (provided by the power supply). Your advantages: - Sturdy anodised aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating - Integrated power limitation The following types are available in this series: - EXWP (built-in mechanics 800 W) - EXW2 (built-in mechanics 1500 W) - EXWUIP (built-in mechanics 800 W) - EXWUI2 (built-in mechanism 1500 W) All types can be ordered as ‘wall mounting’ or ‘DIN rail mounting’.

In addition to proven reliability, you will find a wide range of integrated functions in this series: - Functional safety in accordance with EN/IEC 62061 SIL 2 and EN - ISO 13849-1, Performance Level PL-d “Machinery Directive” - Voltage, current and power control with programmable setpoints and read-back actual values actual values - With integrated programmable e-load (discharge circuit or current sink) for rapid discharge of the output or conversion of the regenerative energy during motor testing in braking mode. - 12-bit resolution - Programmable monitoring of the controller status for voltage, current and power with message or independent safety shutdown - Additional functions on I/O interface for integration into control systems (e.g. SPS) - Possibility of sequential operation (test sequences can be saved and executed automatically) - All parameters (e.g. voltage, current, power, limits, ...) can be stored in 50 non-volatile memory banks and memory banks and can be recalled again - Optional FAST version for shorter programming times (factor 10 to 30) compared to the standard version Your choice of digital interfaces (isolated): - USB (standard) - RS232 (2x RJ45, standard) - CANopen (2x RJ45, standard) - LAN (Ethernet, optional) - EtherCAT (2x Rj45, optional) - Analog (D-Sub, optional) Your advantages: - All digital standard power supplies from Kniel (including Fast variants) operate from the customer's point of view with identical firmware - Sturdy anodized aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating The following types are available in this series: - EXWUID (built-in 400 W to 1200 W) - VE1PUID (19” design 1500 W) - VE3PUID (19” design 3000 W) The EXWUID type can be ordered as “wall mounting” or “DIN rail mounting”.

The latest series of power supplies from Kniel is called Energy Digital Basic. In addition to proven reliability, this series includes all the necessary functions required for a digitally controllable power supply: - Voltage, current and power regulation with programmable setpoints and read-back actual values - 16-bit resolution - Programmable monitoring of the controller status for voltage, current and power with message or independent safety shutdown - All parameters (e.g. voltage, current, power, limits, ...) can be saved in 10 non-volatile memory banks and memory banks and can be recalled again - The delivery status is set to Remote. This facilitates configuration in your your system and the potential replacement of components Your choice of digital interfaces (isolated): - USB (standard) - LAN (Ethernet, optional) - EtherCAT (2x Rj45, optional) Your advantages: - All digital standard power supplies from Kniel (including Fast variants) work with identical firmware from the customer's point of view. If you are already using digital power supplies from Kniel you can expect a reduced but identical command set and therefore a reduced range of functions reduced to the relevant functions. - Sturdy anodized aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating The following types are available in this series: - ELUID (linear regulated power supply up to 100 W) - EXWUID 200 W (switching power supply up to 200 W) Both types are available in the “wall mounting” or “DIN rail mounting” versions.

Legal requirements such as the Energy Efficiency Act (EnEfG), the EU Buildings Directive or the Digital Product Passport are increasing the demands on energy efficiency and digital transparency. With the brand new snap-on module for the Kraus & Naimer KA40 and KA63 main switches, phi by Kraus & Naimer is laying the foundation for sustainable optimisation and smart data collection. Consisting of two components, Kraus & Naimer presents an innovative solution for recording and optimising energy consumption. Real-time monitoring, wireless communication and intuitive visualisation make phi by Kraus & Naimer the ideal choice for retrofits and new installations. DAT.KA* or DAT.SA measurement modules The measurement (DAT) module is available in two versions, both of which have configurable LED indicators and transmit data via radio. Collection of measurement data such as contact temperature (DAT.KA*), current, voltage, power and energy. COM.GW.500 communication module The communication module (COM) serves as a gateway for up to 16 DAT measurement modules and acts as an interface for transferring measured values to higher-level systems. Web user interface Web UI The local web user interface is used to display/analyse the measurement data and to configure the COM module and DAT modules. phi is compatible with energy management systems in accordance with ISO 50001 and supports the implementation of legal requirements as well as internal company sustainability strategies. The module solution can be flexibly integrated into

Holistic solutions for your energy and climate goals – with EnergyPartner+. From the initial consultation and planning to a successful energy concept, we guide you every step of the way: 1. Analysis of your current energy consumption and CO₂ emissions 2. Strategy development – ​​customized, realistic, and feasible 3. Planning & implementation – professional and solution-oriented 4. Ongoing support – even after project completion. The "+" stands for more than just energy: It represents intelligent, future-proof solutions for efficiency, cost-effectiveness, and climate protection.