Exhibitor products

- Radar level sensor - Contactless level measurement of liquids, even through a plastic cover - Opening angle 10° - Stainless steel housing - IO-Link interface - Analog and switching output

Frameless motors have only two main components - stator and rotor - in common with conventional motors. This is a decisive advantage when it comes to tailor-cut design and individual integration into customer-specific systems. Due to the direct integration into machines or device assemblies and the hollow shaft concept with cable, compressed air, vacuum, fiber optic and laser feedthroughs, frameless motors require very little space. At the same time, they are highly efficient and durable and run stably and reliably in quiet operation. The KOCO MOTION motors are characterized by an immediate peak torque of up to 2400 Nm, a maximum motor speed of up to 900 rpm and a high level of user-friendliness. The frameless motors are also highly precise. They are backlash-free during high-precision and high-speed operations and have an extremely high level of positioning accuracy. KOCO MOTION supports and advises on the optimal design and integration of the modularly configurable frameless motors into customer systems. Since the compact motors are used in a wide variety of industries, such as robotics, mechanical engineering, packaging technology, semiconductor manufacturing or medical technology, it is important to precisely adapt and select all the necessary motor components. This is the only way to really get the best out of the frameless motor.

Full Service Provider, Work Contracts - Inquiry Support - Feasibility Studies - Risk Assessments - Field Trials - Implementation with Construction and Project Planning - Complete Testing Sorftware`s Parameterization - Pre-Acceptance in-House - Acceptance Run und Process Support - After Sales Services

The MG-x-T2x machine handles are functional handles made of natural-colored anodized aluminum and handle legs made of black plastic. The profile was specially designed to integrate additional functions in the installation of electronic assemblies. The MG-x-T2x series is equipped with two integrated electronic buttons with short-circuit-proof output drivers and a green feedback LED. Contactors can be operated with the integrated semiconductor power drivers without a coupling relay. The buttons are debounced via software and have a minimum duty cycle of 200ms. The connection to the supply voltage (24VDC) is made via a 5m cable with an M12 connector or with an open end. The polycarbonate diffuser, specially developed for LED applications, ensures a homogeneous Luminous surface with high efficiency.

Industrial 3D printer for the production of robust components with continuous fiber reinforcement The FX10 is Markforged's latest industrial 3D printer – designed for the serial production of strong, precise components directly in-house. With its robust construction, a closed print chamber, automated calibration, and two interchangeable print heads, the FX10 delivers the highest process reliability – day after day, shift after shift. Thanks to Markforged's proprietary continuous fiber technology, components can be reinforced with carbon, Kevlar, or glass fibers, achieving strength comparable to aluminum while being lighter. Ideal for equipment, grippers, fixtures, and spare parts that must withstand harsh industrial environments. The system processes Onyx (a nylon-based material with microcarbon fiber) as well as other high-performance materials such as Onyx FR or Smooth TPU 95A. The modular design also allows for quick switching between composite and metal 3D printing, as the FX10 is also compatible with the metal print head. This makes it particularly flexible – without the need for a second machine. The FX10 is controlled by the intuitive Eiger software, which can be operated cloud-based or locally. The integrated sensors and automatic laser measurement ensure consistent quality and reduce manual intervention to a minimum. Key Features: Build volume: 375 x 300 x 300 mm Print materials: Onyx, Onyx FR, Onyx ESD, TPU, continuous fiber Two interchangeable print heads (composite and optionally metal) Automatic calibration & laser measurement Integration into existing manufacturing processes possible The FX10 is designed for companies that not only want to test additive manufacturing, but also want to use it productively and cost-effectively – today and in the future.

The unique slim interface relay with industrial pin The OMRON G2RV-ST is a pre-assembled 6mm slim relay with industrial pin. Often used as PLC interface and ideal for compact panels and equipment. In just 6mm wide, the G2RV-ST offers all of the Omron durability and reliability required for industrial applications. - Push-in plus Technology – easy wiring - Lockable test switch models available - Large plug-in pins – excellent connection - LED/mechanical flag – check operation - Transparent housing – check condition - Slim outline – space saving - G3RV compatible

Solid state relays for heaters Single-phase SSR for low heat generation enables carrying 25 A (G3PJ-_25B(-PU)) even for close mounting of three SSRs to contribute to downsizing of control panels. Models available with push-in plus input terminals. - Surge pass protection improves surge dielectric strength for output currents - Both push-in plus and screw terminal input terminals available - Mount to DIN Track or with screws - RoHS compliant

GA700 drives are designed to be easily integrated into systems and machinery. GA700 drives incorporate a variety of features which eliminate the need for peripherals. Simple wiring and smart features enable basic setup in just 5 minutes, significantly reducing time and cost. By incorporating the latest motor control technologies for induction, permanent magnet, and synchronous reluctance motors, the GA700 drives provide superior control performance with minimized energy consumption. The robust design featuring coated PCBs allows operation in 50 °C without derating, while machine monitoring functions prevent sudden production stops.

Intelligent gateways: As special as your application or your existing bus system is, this series of devices was developed as flexible and individual. The variety of interfaces, designs and applications on the market is covered by a wide variety of gateways. The standards that have been tried and tested a million times worldwide, such as BACnet, M-Bus, KNX, Profinet, Profibus, Modbus TCP/RTU, can be networked or connected to one another quickly and easily. With the various designs, the gateways are suitable for any installation location. The modular firmware structure gives you standard functions that have been tried and tested worldwide, but which you can flexibly adjust to the special needs of your applications. Our gateways are compatible with the interfaces of leading manufacturers and bus organizations. The A1 case: The slim, space-saving A1 design, just 23 mm wide, is ideal for installation in the control cabinet. The top-hat rail mounting and the removable screw terminals ensure quick and safe installation as well as problem-free wiring of the device. The B2 case: The compact design B2 is ideal for installation in the sub-distribution. The DIN rail mounting ensures a quick and safe installation of the device.

Pushbuttons, switches, indicator lights, modular control concept

The GFX Hepco Guidance System for Beckhoff XTS Transport System uses linear servo motor technology to drive movers around a track. The motion of each mover is independently controlled, offering complex high-speed motion profiles without compromising positional accuracy. Combined with HepcoMotion’s proven track systems the highly versatile product is rapidly being adopted within the packaging and manufacturing industries as users benefit from vastly improved production rates with the ability to make on the fly product changes.

GFX Agile is a very low mass variant of the standard GFX Guidance System for Beckhoff XTS, providing higher accelerations to achieve a higher throughput.