Exhibitor products

Tiger is a SIL3 and PLe certified, robust radio control system adaptable to standard and complex lifting and non-lifting applications in harsh environments. It is available in several radio bands with frequency hopping technology, changing frequencies within a spectrum every 40 milliseconds. SIL3 and PLe Available in different configurations, Tiger receivers provide standard relay and analogue in/outputs, digital inputs and communication via different fieldbus systems, whereas both the STOP function and two designated relays are approved according to SIL3 IEC 61508 standard and PLe, the highest safety rating available in radio control. Tiger is capable of providing feedback from your machine, displayed on the transmitter’s LCD screen or alternatively utilizing LED’s situated next to the transmitter’s function buttons. Systems are pre-programmed with operating modes accommodating hundreds of different user applications. Advanced settings or custom software are available upon request. Our system wouldn’t be complete without a wide range of receivers. We can offer smaller seven relay receivers up to very large receivers with 28 relays. In this range you will also find receivers with bus technology: Profibus, Modbus, CANopen and J1939. There is also the option of an analogue receiver which supports step less, analogue control. Furthermore we also have receivers that can plug-in directly to an application that supports a 10-pin Harting connector. All receivers have high quality casings at IP65 or IP66.

The TM30S streamlines heavy‑duty palletizing with long reach, stable motion, and certified collaborative safety for clean stacks on Euro and US pallets—no riser required. Built‑in vision, compact design, and intuitive setup keep cells flexible and move teams from trial to production quickly. With a 30 kg payload and 1702 mm reach, it maintains cycle consistency under load—enabling fast deployment and reliable throughput. Hardware enhancements Across the S Series, OMRON has introduced upgrades to increase durability and support faster redeployment. All robot arms now feature an IP65 rating for use in washdown or dust-prone environments. Higher-payload units (TM25S, TM30S) incorporate an integrated joint 6 force-torque wrist sensor for improved force-controlled processes. The updated Landmark 2.0 vision-based positioning system is designed to reduce recalibration time when moving robots between stations. TMflow 2.22 software release OMRON has also released TMflow 2.22, an update to its no-code programming environment. The new version introduces more granular safety configuration options, expanded remote monitoring and diagnostics, and a higher-fidelity simulation engine. Integrated vision tools have been strengthened to support inspection and pick-and-place tasks with greater accuracy. “By introducing the TM30S, TM20S, and TM6S alongside crucial upgrades like IP65 certification and the integrated joint 6 force torque sensor, we are empowering our customers to automate their most challenging, heavy-duty tasks with greater safety, precision, and flexibility than ever before. TMflow 2.22 ensures that this immense power remains easy to program and manage, upholding our commitment to harmonious automation,” said Qiqi Wang, Global Product Manager at OMRON Robotics and Safety Technologies. For further information on the TM S Series and TMflow platform.

Latch-type toggle clamps, such as vertical and horizontal acting toggle clamps, have been a permanent feature of the Ganter product range for over 30 years. The expansion of both toggle clamp genres make them the ideal solution for an even wider range of applications. Safety hooks keep the toggle clamp closed securely GN 820.3 horizontal acting toggle clamps and GN 851.3 and GN 852.3 latch type toggle clamps provide a new function: an additional lock prevents inadvertent detachment caused, for example, by vibrations or incorrect operation. When the toggle clamp is closed, the additional safety hook automatically locks and holds the lever in a closed position. The spanner can then be opened, or rather, detached through a simple one-hand operation. The safety hook on the horizontal acting toggle clamps is operated by the index finger, while for the latch type toggle clamps it is opened by pressing from above with the thumb. Now including spindle assembly with rubber tip As previously, Ganter’s horizontal and vertical acting toggle clamps leave no wish unfulfilled: we offer horizontal or vertical mounting bases, as an assembly kit or as a U-bar or solid bar versions. These components have long served as reliable standard parts. The possibility of including an adjustable spindle with a rubber tip is a new option. Until now, these had to be ordered separately as an accessory, for example as the GN 708.1 standard part. The spindle assemblies included in the set correspond to the standard sizes most commonly used – should a specific configuration be required, this can of course be ordered separately. Along with the toggle clamp versions with additional locking as described above, spindle assemblies are also available for GN 810 (vertical acting toggle clamps), GN 812 (with dual flanged mounting base), GN 820 (horizontal acting toggle clamps), as well as for the GN 860 (pneumatically operated spanner) models. Find out more at www.ganter-griff.com

Tolerance rings by Dr. TRETTER® – smart fixation of special applications Engineers have to face many technical challenges in every industry. For applications, several difficulties need to be overcome, for example: Thermal expansion, e.g. of light metal housings Reduction of vibration Reducing noise development Creating torque control Torque transmission Transmission of axial forces Levelling misalignments Bypassing large tolerances of the connecting components Our tolerance rings can help in all those matters and offer significant advantages compared to other connection types. Together with you, we want to meet the challenge and offer you the perfect solution. We support you during development, design your shaft-hub connection, and support you in the construction and testing phase. Thanks to our own production site in Switzerland, we can attend to all your requirements and special requests. Dr. TRETTER will make your innovative product development possible!

Safe tool changing up to 1,250 kg – with dual safety locking.

Safe tool changing up to 1,250 kg – with dual safety locking.

eparation and provision of pre-cut compression pads. The compression pads are picked up and applied to the battery modules by an on-site vacuum handling system. Features topex special label dispenser with servo drive Motorised large roll unwinding Motorised retractable dispensing edge for separating the compression pads Roll outer diameter 700 mm Core diameter 10" Siemens S7-1500 controller integrated in control cabinet

Discover the whole range Unsurpassed versatility and compact design. The 7000 series is the right solution when great application flexibility is required and the highest demands are placed on labeling system. Whether for text, barcodes, 2D codes or graphics – top quality applies across the board. Reliable and safe – with thermal transfer printing technology.

The IO-Link-capable load monitoring system topGUARD offers remote control options, full data transparency, and reliable protection of the 24 V system voltage. It is an outstanding supplement to the IO-LINK-capable PROtop power supplies. • Data transparency and remote control due to IO-Link • Maximal flexibility thanks to a modular system • Voltage-adaptive load monitoring according to Class 2 • Time and cost savings due to an integrated distribution of potential • Simple migration from maxGUARD to topGUARD

Torque-resistant ball bushings for linear motion and simultaneous torque transmission Torque-resistant ball bushings or Ball splines are non-rotating round guides. In addition to transmitting linear motion, they can also transmit as well as support torques – even in narrow spaces. As opposed to conventional shaft guides, the ball spline is equipped with four axially parallel guiding groove races. The osculation of the balls in the raceways of bushing and grooved shaft, analogous to a profile rail guide, makes it possible to transmit significantly higher loads and torques compared to a conventional ball bushing. Thanks to the non-rotating bearing of the torque-resistant ball bushing it is not necessary to use, for instance, two parallel round guides or another form of support.

Fit for new machine regulations

TR-Electronic now offers EPLAN macros for download for the various standard rotary encoders of the C__582 series. This enables simple, seamless integration of the electrical side of the sensors from TR-Electronic into the electrical plan of the machine or system. Depending on how you work, different views can be used, which, for example, show bus and supply lines in separate units (for the separate documentation of data and supply lines) or together in one unit. If you work with pre-assembled cables and therefore do not need any detailed information about the cores of the bus cable, you can use a particularly compact representation. For integration in parts lists, it is advisable to store the part order number of the selected rotary encoder in the macro data. This means that parts lists can also be easily created using the electrical plan and the decisions made on the design, interface, shaft geometry... are clearly defined via the part number. Like all product documentation, the macros can be found in the downloads for the individual items on the TR-Electronic website via the product selector. The assignment to article numbers that can be ordered ensures that the macro valid for the respective rotary encoder is reliably identified. The EPLAN macros complement the already available STEP 3D data of the latest encoder generation from TR-Electronic. This allows users to efficiently and reliably integrate TR rotary encoders into the mechanical and electrical design of a machine or system. EPLAN® is a registered trademark of EPLAN Software & Service GmbH & Co. KG or its affiliated companies in Germany and other countries.

Whether its EPLAN training, Engineering Base training, a WSCAD course, or an E3.Series seminar – we will equip you for any challenge in electrical engineering. Online or on-site, in a group or tailored to your company: Our training courses are as flexible as your daily work – and so practical that you can immediately apply what you've learned. Our training locations: Learn where it suits you best – always with state-of-the-art equipment and an ideal learning environment: In our CAE training centers in Austria – with the latest technology, optimal infrastructure, and personalized support. Directly at your company – tailored to your processes and your team. Or completely flexible online – location-independent, interactive, and practical.

Mehr als 30 Jahre Erfahrung bei der Konzeptionierung und Fertigung individueller Transfersysteme machen uns zum Spezialisten mit dem Know-how für jedes Einsatzgebiet. - Individuelle Transportsysteme, angepasst an Ihren spezifischen Workflow - Optimale Verknüpfung von Montage- und Transfertechnik sowie bspw. mit Produktionsassistenten - Zahlreiche Zusatzausstattungen, wie bsp. Lifte, Pufferspeicher, Brückenmodule, Drehmodule uvm. - Moderne, lineare Antriebstechnik für maximale Steigerung der Produktivität - Einsatz vernetzter Produktions- und Intralogistiklösungen

Unsere Erfahrung bei der Konzeptionierung und Fertigung individueller Transportsysteme machen uns zum Spezialisten mit dem Know-how für jedes Einsatzgebiet. Unsere Transportsysteme sind so flexibel kombinierbar und einsetzbar, dass sie sich exakt an Ihre Anforderungen und Bedürfnisse anpassen. Bei der Planung berücksichtigen wir die unterschiedlichen Bearbeitungsschritte der Werkstücke und passen das System mit entsprechenden Prozessmodulen an.