Exhibitor products

PHOENIX CONTACT is an internationally operating company with headquarters in Germany and offers innovative products and solutions in electrical engineering and automation worldwide, especially in the areas of industrial communication, board-to-board connectors, PCB terminals, connectors, control cabinet technology, e-mobility, software and much more. Börsig as an approved distributor of PHOENIX CONTACT products will be happy to advise you and offer the best possible solution, also gladly for customized solutions.

Sensors in this category can use light to detect or count objects contactlessly, measure distances and detect light, color, gloss or luminescence. Photoelectronic sensors are not only characterized by their functionality, but also by their space-saving design. The additional connection of special fiber-optic cables permits their use in extreme conditions such as cold, hot or tight spaces. The broad portfolio of photoelectronic sensors is divided into 15 product categories to meet the requirements of a wide range of applications. Each category offers a variety of solutions to ensure the right sensor size is available for each specific application. The designs include cubic, metric and hybrid shapes in plastic, aluminum or stainless steel housings. The optical sensors operate reliably in a temperature range of –50 to +250 °C and offer a detection range of 0 to 100,000 mm.

The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing.

PLC500 is a Medium-sized Programmable Logic Controller, compact in size, robust in performance and modular in programming. It is a solution that uses WEG technology and the CODESYS® platform flexibility, allowing the development of flexible and efficient solutions. With high-processing hardware, it is possible to perform highly complex tasks, such as timing, counting, basic and advanced math operations, interlocking logic, PID control and much more. All that, at high speed and with maximum operational accuracy.

The PLICA Click-Tec cable gland is designed to make installations more efficient and straightforward. Its innovative design eliminates the need for a locknut, significantly reducing installation time. Ideal for wall thicknesses of 1.5 to 3 mm, it offers a high protection rating of IP68, ensuring maximum defense against water and dust. Made from durable polyamide (PA), it is available for cable diameters ranging from 2 to 18 mm, covering a wide range of applications. The PLICA Click-Tec is the perfect solution for quick, secure, and reliable cable installations.

The PLICA DUOFLEX PP-UV is specifically designed for applications where cables need to be protected or added retrospectively. Made from UV-stabilized polypropylene, this split conduit ensures high resistance to UV radiation, making it excellent for outdoor use. Its split design allows the PLICA DUOFLEX PP-UV to be easily installed around pre-existing cables without the need for disconnection, saving time and effort during installations or maintenance. The robust construction offers reliable mechanical protection against external influences such as abrasion, moisture, and chemical substances. Typical applications include: - Industrial settings: Protecting cables and wires in production facilities. - Building technology: Retrofitting cable protection in existing installations. - Outdoor areas: Applications requiring high UV resistance. The PLICA DUOFLEX PP-UV is available in various diameters to meet diverse requirements. Its easy handling and high flexibility make it the ideal solution for retrofit cable protection across a wide range of applications. PLICA DUOFLEX PP-UV – Your reliable partner for flexible and efficient cable protection.

The plica tube can be easily bent and flexibly installed as needed. This stainless steel flexible tube is particularly suitable for photovoltaic systems and outdoor cable installations, enabling quick and secure installations without the need for additional fixed bends. Made of AISI 316L (V4A) stainless steel, the plica tube offers high resistance to weathering, including hail, UV radiation, and mechanical stress. This makes it especially suitable for demanding outdoor installations. The flexible, corrugated structure facilitates installation even in tight spaces or around corners. The plica tube can be unrolled directly from the coil, shaped flexibly, and adapted to the specific installation situation. For installation, the tube is simply cut to the desired length and deburred. This allows for quick, efficient, and clean cable installations. The corrugated design ensures high flexibility, simplifies installation, and allows for individual adjustments on-site. Thanks to the elastomer insulation, the tube remains protected against weathering, ozone, and moisture. With a temperature resistance of -270 °C to +600 °C, this pipe is extremely durable. It is designed for various nominal pressures: DN12 = 21 bar, DN16 = 16 bar, DN20/DN25 = 10 bar. Its light weight facilitates handling and reduces installation time. A pipe cutter and precise cutting are required for safe installation. When cutting, the pipe should not be cut too short to ensure a secure seal. The FSS V4A flexible conduit is ideal for protecting and routing cables in photovoltaic systems, especially in demanding environments such as offshore installations, industrial plants, or building services. Solar stainless steel flexible conduit FSS V4A – corrosion-resistant, flexible, and durable.

• For hygienic and industrial applications • For any conductive media, whether foaming, pasty or adhering - with conductivity > 5 µS/cm • Automated sensor adjustment to the media ensures high flexibility even in a large variety • Ideal for small measuring heights/tanks sized 200 mm to 3000 mm • Extremely short response time < 100 ms for highly dynamic processes • Digital IO-Link interface and additional Dual Channel

This compact and inexpensive power amplifier is designed to control proportional valves with a magnet. This amplifier in the connector housing is mounted directly on the valve. The device is designed for control and parameterization via I/O link and has a port Class B. The output current is regulated and therefore independent of the supply voltage and the magnet resistance. This module can be adapted to proportional valves from various manufacturers via the free parameterization of the power output stage. Typical applications: Current-controlled control of throttle or pressure valves as well as general inductive loads. Features • Power amplifier for proportional valves in a DIN EN 175 301-803 A connector housing • I/O – Link Port Class B, with internal galvanic isolation of the additional supply voltage • Complies with specification V1.1, data rate COM3 = 230.4 kBaud • Digital, reproducible settings • Can also be used as a soft switch amplifier (soft switching on and off) • M12 connector • Can be parameterized via I/O - Link • Free setting of ramps, MIN and MAX, dither (frequency, amplitude) and PWM frequency • Output current up to a maximum of 2.5 A, parameterizable • Adaptable to all standard proportional valves

The PM2 pinion is designed for gearboxes with a flange output shaft, and is equipped with a mechanical interface which is standardized in accordance with ISO 9409-1. Its small number of teeth allows high feed forces. The PM2 pinion for flange output shafts is mounted to the following gearbox series: PFHE, PSFN, PLFN and WPSFN

The self-adhesive PMG NFC onMetal RFID tags are not only an efficient, but also an extremely versatile solution for the individual marking and identification of equipment, especially on metallic surfaces. At a time when precise traceability and effective management of assets are crucial, these tags offer maximum functionality. These labels enable clear identification and tracking of operating assets, resulting in efficient and well-organized management. An innovative NFC function enables uncomplicated capture using smartphones and is therefore the interface between people, machine and product. The areas of application are wide-ranging - from the marking of operating equipment that is subject to regular inspections to the marking of employees' personal or temporary equipment. The labels are applied to easily accessible but protected areas on the operating equipment (e.g. metallic surfaces). For optimum adhesion, the surfaces should be clean, dry and free of oil and grease.Technical finesse for durability and resistance:The robust structure is based on high-performance films and special adhesives, which ensures extreme durability and resistance. In addition, a laminate film protects the print from scratches and smudging and enables excellent ANSI/ISO scannability even under difficult lighting conditions. The labels are weatherproof, wash-resistant and UV-resistant. The excellent chemical and solvent resistance is also impressive. Compliance with the RoHS (2011/65/EU) and REACH directives is a matter of course. The NFC inlay is classified in accordance with the Radio Equipment Directive (RED 2014/53/EU) (ETSI EN 300 330 V2.1.1, 13.56 MHz), which promises the highest quality and conformity in terms of technology and materials. With PMG NFC onMetal labels, you are not only opting for first-class labeling, but also for a sustainable and technologically advanced solution.

Whether in intralogistics, industrial production or in other, mostly automated supply chains - without consistent object identification, efficient process control is not possible or only possible with a great deal of additional effort. Barcode markings must therefore not be lost or damaged and must also have a permanent, high-contrast print image. OnMould barcode labels meet all requirements for durability, weather resistance, robustness and machine readability when marking objects. An optionally integrable tamper protection system also ensures excellent protection against counterfeiting, especially for high-value goods and merchandise.

Readability without direct visual contact and a high non-reliance on cleanliness are two of the definitive advantages of RFID technology in many processes – in intralogistics as well as in industrial production or in other, mainly automated goods cycles and supply chains. This is where OnMould RFID labels from Plöckl Media Group (PMG) stand out from the masses. Regardless of their operating environment, they can meet all demands on durability, weather resistance, toughness and machine readability – and thus guarantee a safe, individual long-term identification of objects.

In many companies, RFID plays a central role when it comes to capturing goods and products safely and efficiently. However, traditional RFID labels often reach their limits when applied to certain materials such as metal, glass, or liquid-filled surfaces. These materials can interfere with or completely block the radio signal, leading to faulty or even missing readings. This is exactly where the PMG RFID FlagTag comes in. Its distinctive feature is its flag-like design – meaning the antenna does not lie flat against the product but extends outward like a flag, separated from the material. This significantly reduces signal interference that would normally occur with metallic or liquid surfaces. As a result, the RFID signal can be transmitted freely and stably, ensuring reliable data capture. In addition to this technical innovation, the FlagTag impresses with its compact and discreet design. The white, adhesive-free print surface can be customized – whether through in-house printing with TTR or RFID printers, or as a pre-printed and encoded version. This flexibility allows the label to adapt to a wide range of requirements and applications. The PMG RFID FlagTag is highly versatile. Whether in deep-freeze storage facilities, dynamic supply chains, or densely packed product environments (bulk reading), it consistently ensures a secure connection to RFID readers and enables precise, fast data capture. Numerous industries – from logistics and healthcare to smart retail – benefit from this reliable solution. With the PMG RFID FlagTag, Plöckl Media Group demonstrates how modern RFID labeling works today: robust, flexible, and future-proof.

Plöckl Media Group developed – and has just considerably improved – the PMG RFID Looptag for labeling tasks where it is not possible to apply the label directly to the object. Whether it be cable harnesses, power and server cables, plants, bags or baskets, whether for the labeling of high-pressure coolant hoses in vehicles or Euro containers and other holders – the looptag can be applied reliably and with ease, and can be currently read from a distance of up to three meters, for example when the goods are stored in a high shelf compartment. Another advantage: no visual contact with the PMG RFID Looptag is required – a feature that additionally simplifies the identification procedure.