Exhibitor products

Products for quick and simple monitoring of process-relevant parameters. These include temperatures, flow rates, consumption values, deviations or leakages of liquids, gases or pressures. Flow sensors: media-independent monitoring of the flow rate or flow quantity. Flow sensors are used for monitoring flow rates and flow quantities. KEYENCE's flow sensors can be installed without interfering with the pipe system by simply clamping the sensors to the pipe from the outside. Depending on the model, the flow sensors can detect liquids or compressed air and gases and monitor them in a process-stable manner. Pressure and air pressure sensors: pressure monitoring in pneumatic and hydraulic systems Pressure sensors can measure the pressure of various media (gases and liquids). Since a pressure sensor can measure the pressure in the pipe of a system or device during operation, value-based condition discrimination is possible. Compared to pressure gauges, the compact pressure sensors offer greater installation flexibility. In addition to pressure readings on the main unit or amplifier, connecting the sensor to a PLC or computer allows remote monitoring of measurements from multiple pressure sensors. The data collected by the pressure sensors is also useful for trend analysis and predictive maintenance. Temperature sensors: Non-contact or clamp-on temperature sensors for a wide variety of temperature measurement types up to 1350°C. Component as well as media temperatures can represent important information in the ongoing production process. Our temperature sensors can record data easily and without touching the medium/component.

Our handling solutions include advanced axis systems and robotic integration, selected to match each application and customer requirement. Designed for precision, flexibility and efficiency, they ensure smooth transitions and optimized workflows.

Efficient product transport is the backbone of automation. Our in-house belt, WPC and turntable solutions ensure smooth and reliable product flow throughout your production line. We also integrate third-party transport systems to deliver the ideal solution for every application.

The company GEORG SCHLEGEL GmbH & Co. KG from Dürmentingen, founded in 1945, develops and produces control devices, emergency stop buttons, built-in sockets, RFID tags, bus systems, housings, terminal blocks and limit switches in outstanding quality (“made in Germany”) award-winning design. Thanks to extensive manufacturing options, many years of experience and flexibility, customer-specific solutions can also be implemented.

Production planning is a key pillar of successful manufacturing. The Production Planning module of the ATR.SmartFactory.Plattform provides a powerful solution to help companies coordinate production orders efficiently, make the best use of resources, and respond flexibly to change. With clear planning views, intelligent recommendations, and seamless integration of real-time data, ATR Software’s Advanced Planning and Scheduling (APS) supports sound decision-making and helps keep operations running smoothly. The Production Planning module offers three levels that differ in the degree of automation. Whether you prefer manual planning with smart assistance features, semi-automated planning supported by intelligent algorithms, or fully automated production control, each level delivers distinct benefits. The levels can be used independently or introduced step by step as part of an ongoing digital transformation. Benefits at a glance: • Flexible, rapid response to changes in production • Maximised efficiency and productivity • Better resource utilisation and optimised capacity usage • Fast, effective adaptation to new challenges • Improved on-time delivery and increased customer satisfaction • Production optimisation based on defined constraints • Reduced manual planning effort and fewer errors • Shorter lead times and reduced downtime Meet our experts at all about automation Friedrichshafen and discover the future of production. We look forward to seeing you! For more details, download the accompanying PDF.

Automation cells are used in many different industries, e.g. as manual workstations, for camera-monitored inspection systems or as protective enclosures for fully automated production lines. Schimscha develops and produces cells for all applications and requirements. In batch size 1 or series production. As an individual solution or part of a system. Including all the necessary technical components

profiCASE is an economical alternative for panel PCs up to 10" and all types of electronic components. Thanks to its robust design, it is perfectly suited for both modern mechanical engineering and vehicle construction. The integration of genuine hinges without additional effort has been optimally achieved in this series. After ‘hooking’ the covers and securing them with locking screws, they become ‘compact cabinets’. The two profiCASE enclosures are available with the option of rear screw mounting – i.e. without screws visible from the front – (PCD) or with front screw mounting – for example, for direct wall mounting – (PCV). All enclosures have domes in the lower section that offer the option of mounting with VESA 100 while remaining completely sealed. It is also possible to connect them to the profiPLUS and taraSMART suspension arm systems in a standing or hanging configuration.

Profile rail guides are indispendable in modern production systems. ERO-Führungen has a large selection of them in its portfolio.

Our E-Line profiles have the same grid dimensions as the MK profiles and are 100% compatible. We are happy to take on the design and assembly of your profile racks, workstations, safety equipment and customised special solutions. We also offer compatible cross-sections from Bosch and Item.

Profile enclosure - made to measure from 150 to 800 mm Eight enclosure depths: 60, 90, 120, 150, 180, 210, 240, 300 Handles, keyboard holder, desk solution all available as accessories IP 65 / EN 60529 Thanks to the option of combining the three basic profile depths, profiPANEL enables a total of eight mounting depths to be provided for (PPD 150 is available, as required, as a basic profile or as a profile combination consisting of a 90 mm and a 60 mm basic profile). The connection of 60 or 90 mm deep desk also offers additional options for extended internal mounting. Thanks to this wide range of depths, profiPANEL therefore enables almost every conceivable configuration for the internal mounting of components to be realised. The enclosure front of the profiPANEL system is manufactured made-to-measure and provides for the almost edgeless and flush mounting of a front plate, which is permanently connected to the enclosure. Appropriate cut-outs for a display, switches and more are included in the service provided by ROLEC and are produced ex-works to meet customer specifications. A desk is a clever solution when there’s not enough space in the control enclosure or you need additional buttons. The profiPANEL series therefore includes two desk models, 60 and 90 mm deep (D), for internal mounting. The desk adapter offers plenty of space for routing HDMI or DVI cables or network plugs.

The premium design supportarm system IP 54 The profiPLUS 50 system is designed for time-saving assembly. For this, ROLEC engineers have developed the "one-screw adjustment" feature which means the system can be fully adjusted by just a single screw. All system couplings are pre-fitted with a support profile as standard, saving assembly time. The ducts in the interior of the system provide space for multiple cables such as HDMI, DVI and network cables. Cable protectors are integrated into all rotating system elements as standard. Fully integrated electrical bonding protects operators and the machinery. A set screw system in the joints allows adjustment of the pivoting range in 30° steps. For higher loads, a reducer adapter also enables connection of profiPLUS 50 to the larger profiPLUS 70 system.

The premium design supportarm system IP 54 profiPLUS 70 is a modern suspension arm system which combines ergonomic design with advanced technology. The highly attractive appearance perfectly matches the design of modern machines. profiPLUS 70 offers more room for cables and connections than the smaller profiPLUS 50 system. At the same time, the system's bearing strength is significantly higher. The profiPLUS 70 system is designed for time-saving assembly. For this, ROLEC engineers have developed the "one-screw adjustment" feature which means the system can be fully adjusted by just a single screw. All system couplings are pre-fitted with a support profile as standard, saving assembly time. The ducts in the interior of the system provide space for multiple cables such as HDMI, DVI and network cables. Cable protectors are integrated into all rotating system elements as standard. Fully integrated electrical bonding protects operators and the machinery. A set screw system in the joints allows adjustment of the pivoting range in 30° steps. The range includes reducing adapter for connecting to the profiPLUS 50, thus making it possible to mount display panels from leading manufacturers such as Siemens, B&R and Beckhoff.