1160 results found
    1. WERMA presents LineLIGHT Fusion Segment | Integrated signaling solution – now also with segmented lighting function

      WERMA presents LineLIGHT Fusion Segment | Integrated signaling solution – now also with segmented lighting function

      With the introduction of the first modular signal tower KombiSIGN, WERMA Signaltechnik set a technological milestone and defined a new standard for industrial signaling. The family-owned company is now consistently continuing this innovative strength: Following the development of LineLIGHT Fusion – the first fully integrable signaling solution – the next evolutionary stage is now here: LineLIGHT Fusion Segment. This new variant makes it possible to divide the light pattern into several segments and display machine statuses even more precisely, individually, and intuitively. For example, two states can be signaled simultaneously, indicating an even more specific need for action. In addition, an automatic scaling function is available, allowing process steps or progress to be clearly displayed. WERMA is once again setting standards for modern machine design and intelligent signaling solutions.

    2. WERMA presents the compact MC 55 LED recessed beacon as a new touch version and with smart additional functions

      WERMA presents the compact MC 55 LED recessed beacon as a new touch version and with smart additional functions

      The successful MC product family from WERMA impresses with up to seven colors in just one luminaire. The series is available in two different sizes and optionally with or without additional acoustics. Thanks to the high IP69K protection rating and UL approval for the US market, the MC range of beacons can also be used in extreme conditions worldwide. The MC55 series is now also available as a touch version with smart functions. Powerful, robust and compact product family in two sizes The MC series from WERMA is available in two sizes: the MC35 has a diameter of 35 mm and the MC55 measures 55 mm. Both LED lights offer up to seven colors - red, yellow, green, white, blue, violet and turquoise - in a single light. Alternatively, a tricolor version with the colors red, yellow and green is available. All models are also available with loud acoustics to attract additional attention. The lights are not only clearly visible from all sides, but also offer a long service life of up to 50,000 hours, making them particularly easy to maintain. They are also robust and designed for extreme operating conditions. Thanks to the high IP69K protection rating and UL approval for the US market, they can be used worldwide, including in food processing and other demanding industries. New variants with smart touch function WERMA is now expanding the compact MC series with two new models: the MC55 Touch and MC55 Touch Smart. Both variants offer additional smart functions such as status change by touch, acknowledgement and time-based escalation modes. This provides even more flexibility and smart solutions for industrial applications. The new products add an innovative touch function to the MC55 series and offer intelligent solutions for modern machine and system control: The new MC55 Touch offers three predefined colors red, yellow and green in just one light. The user can trigger a pulse signal by touching it and thus provide feedback to a control system.

    3. WG20 Geared motors

      WG20 Geared motors

      WG20 A NEW GENERATION of Geared Motors WG20 is the first geared motor range to be completely developed in-house at WEG. It comprises helical, parallel shaft, helical bevel and helical worm gear units with torques between 50 and 18,000 Nm. Already the two-stage units excel with their large ratio range, as well as being exceptionally efficient thanks to the sophisticated design. The light aluminium housings of the gear units up to 600 Nm and the robust cast iron housings from 800 Nm provide a highly versatile and reliable product, with a wide range of possible applications.

    4. Where is the leakage?v

      Where is the leakage?v

      No, this is not the beginning of a crime story. Rather, we would like to introduce you to a new product in the ipf portfolio. Our leakage detection device for compressed air. In process automation, the use of compressed air plays an essential role. At first glance, the production of this operating resource seems uncomplicated, but including the provision of this resource, it requires an expenditure of resources that should not be underestimated. For example, compressed air must be available in a correspondingly pure form, i.e. filters must be used to clean the air (condensed water and particles) so that the system does not experience excessive wear. Nevertheless, wear and tear, but also damage, repeatedly lead to uncontrolled loss of system compressed air, which is noticeable by more or less loud hissing. Locating the leakage points of the compressed air was previously sometimes time-consuming and nerve-racking. However, the ipf leakage detector can provide considerable assistance in the search. Special microphone attachments, a headset and an integrated laser pointer allow the position of a leak to be precisely determined. Since the leakage location in a system may not be easily accessible, there are various microphone attachments available to reach even inaccessible fault locations and thus identify them specifically. However, the leakage detector not only assists in troubleshooting, but also in checking and documenting the energy balance. For example, the measured values collected on site can be stored in the device with additional information, transferred to a PC, and software can be used to create complete documentation in the sense of energy management according to ISO 50001. The leakage detector is available as a set in a handy case with complete accessories under article number UY98E266 or as a single device under article number UY000001.

    5. White light interferometers interferoMETER

      White light interferometers interferoMETER

      The innovative white light interferometers from Micro-Epsilon set a benchmark in high-precision distance and thickness measurements. The absolute interferometers enable stable measurement results with sub-nanometer resolution offering a comparatively large measuring range and offset distance. The interferometers are used for absolute distance and thickness measurements of transparent objects and wafers. Convince yourself: measurement accuracy at the highest level for applications in industry and semiconductor machine building.

    6. WIRflex - immer die richtige Ausrichtung!

      WIRflex - immer die richtige Ausrichtung!

      Have you often been annoyed that the angled M12 connectors and their cable outlets point in all possible directions, just not where you would like? Have you ever had the situation where the M12 sockets were not installed in accordance with the standards? WIRflex can solve this problem! This means your M12 cables always run in the desired orientation. Simply determine the angle of the cable outlet depending on the installation position of the socket. We manufacture your cables precisely, with 359 additional options! Please feel free to speak to us during your visit to the trade fair.

    7. WS-1000

      WS-1000

      WS-1000: The modular WS-1000 system combines flexibility with standardization. Basic enclosures in various sizes can be further customized with accessory components. Support systems, front panels, and mounting frames can be flexibly combined. Rapid availability combined with individualization. Particularly economical for recurring projects with varying requirements. All WS-1000 components are perfectly matched and meet industrial protection standards. Ideal for machine builders and automation specialists with growing product portfolios. German quality, short delivery times. Modern, ergonomically optimized design with freely selectable RAL color. Customer-specific height and width: modularly combinable enclosure depths from 65-385 mm. IP65 protection class: ideal for harsh industrial environments. Design profile: optionally swiveling or fixed. Rear panel: swiveling or screwed – depending on requirements. Empty enclosure, partially equipped, or ready for connection – individually configurable. Integrated screw channels for flexible internal mounting and expansion. Compatibility with customer-specific support systems and stand solutions. Visualization option: As a special highlight, the WS-1000 enclosure offers an optional integrated LED visualization system – stylish, functional, and unique on the market: Side-integrated LED status indicator: visible from all sides – without any additional surface-mounted lights. RGB or pixel variant: optionally with up to 7 colors or individually controllable pixels for flexible signaling. Versatile use as a status indicator, progress indicator, or design element. Flexible PLC connection: either via customer-supplied controller or via pre-built control modules – including efficient circuit diagram creation. Industrial clarity meets Modern design. The integrated visualization system transforms a housing into a communicating system – functional, versatile, and a real eye-catcher.